| # |
Fixit! |
Error Message |
| 0 |
Fix |
Connection successful! |
| 2 |
Fix |
The system cannot find the file specified. |
| 5 |
Fix |
Access Denied. |
| 5 |
Fix |
Invalid Procedure Call. |
| 6 |
Fix |
Stack overflow. |
| 20 |
Fix |
The system cannot find the device specified. |
| 71 |
Fix |
No more connections allowed. |
| 380 |
Fix |
Invalid Property Value. |
| 600 |
Fix |
An operation is pending. |
| 601 |
Fix |
The port handle is invalid. |
| 602 |
Fix |
The port is already open. |
| 603 |
Fix |
Caller's buffer is too small. |
| 604 |
Fix |
Wrong information specified. |
| 605 |
Fix |
Cannot set port information. |
| 606 |
Fix |
The port is not connected. |
| 607 |
Fix |
The event is invalid. |
| 608 |
Fix |
The device does not exist. |
| 609 |
Fix |
The device type does not exist. |
| 610 |
Fix |
The buffer is invalid. |
| 611 |
Fix |
The route is not available. |
| 612 |
Fix |
The route is not allocated. |
| 613 |
Fix |
Invalid compression specified. |
| 614 |
Fix |
Out of buffers. |
| 615 |
Fix |
The port was not found. |
| 616 |
Fix |
An asynchronous request is pending. |
| 617 |
Fix |
The port or device is already disconnecting. |
| 618 |
Fix |
The port is not open. |
| 619 |
Fix |
The port is disconnected. |
| 620 |
Fix |
There are no endpoints. |
| 621 |
Fix |
Cannot open the phone book file. |
| 622 |
Fix |
Cannot load the phone book file. |
| 623 |
Fix |
Cannot find the phone book entry. |
| 624 |
Fix |
Cannot write the phone book file. |
| 625 |
Fix |
Invalid information found in the phone book. |
| 626 |
Fix |
Cannot load a string. |
| 627 |
Fix |
Cannot find key. |
| 628 |
Fix |
The port was disconnected. |
| 629 |
Fix |
The port was disconnected by the remote machine. |
| 630 |
Fix |
The port was disconnected due to hardware failure. |
| 631 |
Fix |
The port was disconnected by the user. |
| 632 |
Fix |
The structure size is incorrect. |
| 633 |
Fix |
The port is already in use or is not configured for Remote Access dialout. |
| 634 |
Fix |
Cannot register your computer on the remote network. |
| 635 |
Fix |
Unknown error. |
| 636 |
Fix |
The wrong device is attached to the port. |
| 637 |
Fix |
The string could not be converted. |
| 638 |
Fix |
The request has timed out. |
| 639 |
Fix |
No asynchronous net available. |
| 640 |
Fix |
A NetBIOS error has occurred. |
| 641 |
Fix |
The server cannot allocate NetBIOS resources needed to support the client. |
| 642 |
Fix |
One of your NetBIOS names is already registered on the remote network. |
| 643 |
Fix |
A network adapter at the server failed. |
| 644 |
Fix |
You will not receive network message popups. |
| 645 |
Fix |
Internal authentication error. |
| 646 |
Fix |
The account is not permitted to log on at this time of day. |
| 647 |
Fix |
The account is disabled. |
| 648 |
Fix |
The password has expired. |
| 649 |
Fix |
The account does not have Remote Access permission. |
| 650 |
Fix |
The Remote Access server is not responding. |
| 651 |
Fix |
Your modem (or other connecting device) has reported an error. |
| 652 |
Fix |
Unrecognized response from the device. |
| 653 |
Fix |
A macro required by the device was not found in the device .INF file section. |
| 654 |
Fix |
A command or response in the device .INF file section refers to an undefined macro |
| 655 |
Fix |
The <message> macro was not found in the device .INF file section. |
| 656 |
Fix |
The <defaultoff> macro in the device .INF file section contains an undefined macro |
| 657 |
Fix |
The device .INF file could not be opened. |
| 658 |
Fix |
The device name in the device .INF or media .INI file is too long. |
| 659 |
Fix |
The media .INI file refers to an unknown device name. |
| 660 |
Fix |
The device .INF file contains no responses for the command. |
| 661 |
Fix |
The device .INF file is missing a command. |
| 662 |
Fix |
Attempted to set a macro not listed in device .INF file section. |
| 663 |
Fix |
The media .INI file refers to an unknown device type. |
| 664 |
Fix |
Cannot allocate memory. |
| 665 |
Fix |
The port is not configured for Remote Access. |
| 666 |
Fix |
Your modem (or other connecting device) is not functioning. |
| 667 |
Fix |
Cannot read the media .INI file. |
| 668 |
Fix |
The connection dropped. |
| 669 |
Fix |
The usage parameter in the media .INI file is invalid. |
| 670 |
Fix |
Cannot read the section name from the media .INI file. |
| 671 |
Fix |
Cannot read the device type from the media .INI file. |
| 672 |
Fix |
Cannot read the device name from the media .INI file. |
| 673 |
Fix |
Cannot read the usage from the media .INI file. |
| 674 |
Fix |
Cannot read the maximum connection BPS rate from the media .INI file. |
| 675 |
Fix |
Cannot read the maximum carrier BPS rate from the media .INI file. |
| 676 |
Fix |
The line is busy. |
| 677 |
Fix |
A person answered instead of a modem. |
| 678 |
Fix |
There is no answer. |
| 679 |
Fix |
Cannot detect carrier. |
| 680 |
Fix |
There is no dial tone. |
| 681 |
Fix |
General error reported by device. |
| 682 |
N/A |
ERROR WRITING SECTIONNAME |
| 683 |
N/A |
ERROR WRITING DEVICETYPE |
| 684 |
N/A |
ERROR WRITING DEVICENAME |
| 685 |
Fix |
ERROR WRITING MAXCONNECTBPS |
| 686 |
N/A |
ERROR WRITING MAXCARRIERBPS |
| 687 |
N/A |
ERROR WRITING USAGE |
| 688 |
N/A |
ERROR WRITING DEFAULTOFF |
| 689 |
N/A |
ERROR READING DEFAULTOFF |
| 690 |
Fix |
ERROR EMPTY INI FILE |
| 691 |
Fix |
Access denied because username and/or password is invalid on the domain. |
| 692 |
Fix |
Hardware failure in port or attached device. |
| 693 |
Fix |
ERROR NOT BINARY MACRO |
| 694 |
N/A |
ERROR DCB NOT FOUND |
| 695 |
Fix |
ERROR STATE MACHINES NOT STARTED |
| 696 |
N/A |
ERROR STATE MACHINES ALREADY STARTED |
| 697 |
Fix |
ERROR PARTIAL RESPONSE LOOPING |
| 698 |
Fix |
A response keyname in the device .INF file is not in the expected format. |
| 699 |
Fix |
The device response caused buffer overflow. |
| 700 |
Fix |
The expanded command in the device .INF file is too long. |
| 701 |
Fix |
The device moved to a BPS rate not supported by the COM driver. |
| 702 |
Fix |
Device response received when none expected. |
| 703 |
Fix |
ERROR INTERACTIVE MODE |
| 704 |
Fix |
ERROR BAD CALLBACK NUMBER |
| 705 |
Fix |
ERROR INVALID AUTH STATE |
| 706 |
N/A |
ERROR WRITING INITBPS |
| 707 |
Fix |
X.25 diagnostic indication. |
| 708 |
Fix |
The account has expired. |
| 709 |
Fix |
Error changing password on domain. |
| 710 |
Fix |
Serial overrun errors were detected while communicating with your modem. |
| 711 |
Fix |
RasMan initialization failure. Check the event log. |
| 712 |
Fix |
Biplex port is initializing. Wait a few seconds and redial. |
| 713 |
Fix |
No active ISDN lines are available. |
| 714 |
Fix |
Not enough ISDN channels are available to make the call. |
| 715 |
Fix |
Too many errors occurred because of poor phone line quality. |
| 716 |
Fix |
The Remote Access IP configuration is unusable. |
| 717 |
Fix |
No IP addresses are available in the static pool of Remote Access IP addresses. |
| 718 |
Fix |
PPP timeout. |
| 719 |
Fix |
PPP terminated by remote machine. |
| 720 |
Fix |
No PPP control protocols configured. |
| 721 |
Fix |
Remote PPP peer is not responding. |
| 722 |
Fix |
The PPP packet is invalid. |
| 723 |
Fix |
The phone number, including prefix and suffix, is too long. |
| 724 |
Fix |
The IPX protocol cannot dial-out on the port because the computer is an IPX router. |
| 725 |
Fix |
The IPX protocol cannot dial-in on the port because the IPX router is not installed.. |
| 726 |
Fix |
The IPX protocol cannot be used for dial-out on more than one port at a time. |
| 727 |
Fix |
Cannot access TCPCFG.DLL. |
| 728 |
Fix |
Cannot find an IP adapter bound to Remote Access. |
| 729 |
Fix |
SLIP cannot be used unless the IP protocol is installed. |
| 730 |
Fix |
Computer registration is not complete. |
| 731 |
Fix |
The protocol is not configured. |
| 732 |
Fix |
The PPP negotiation is not converging. |
| 733 |
Fix |
The PPP control protocol for this network protocol is not available on the server. |
| 734 |
Fix |
The PPP link control protocol terminated.. |
| 735 |
Fix |
The requested address was rejected by the server.. |
| 736 |
Fix |
The remote computer terminated the control protocol. |
| 737 |
Fix |
Loopback detected.. |
| 738 |
Fix |
The server did not assign an address. |
| 739 |
Fix |
The remote server cannot use the Windows NT encrypted password. |
| 740 |
Fix |
The TAPI devices configured for Remote Access failed to initialize or
were not installed correctly. |
| 741 |
Fix |
The local computer does not support encryption. |
| 742 |
Fix |
The remote server does not support encryption. |
| 743 |
Fix |
The remote server requires encryption. |
| 744 |
Fix |
Cannot use the IPX net number assigned by the remote server. Check the event
log. |
| 745 |
Fix |
An essential file is missing. |
| 746 |
N/A |
An essential file failed to initialize. |
| 747 |
N/A |
MAC not found. |
| 748 |
N/A |
The system timed out while trying to load an essential file. |
| 749 |
N/A |
Invalid phone number. |
| 750 |
N/A |
Invalid authentication attempt. |
| 751 |
Fix |
The callback number contains an invalid character. Only the following
characters are allowed: 0 to 9, T, P, W, (,), -, @, and space |
| 752 |
Fix |
A syntax error was encountered while processing a script. |
| 753 |
Fix |
The connection could not be disconnected because it was created by the
multi-protocol router. |
| 754 |
Fix |
The system could not find the multi-link bundle. |
| 755 |
Fix |
The system cannot perform automated dial because this entry has a custom
dialer specified. |
| 756 |
Fix |
This connection is already being dialed. |
| 757 |
Fix |
Remote access services could not be started automatically. Additional
information is provided in the event log. |
| 758 |
Fix |
Internet connection sharing is already enabled on the connection. |
| 760 |
Fix |
An error occurred while routing capabilities were being enabled. |
| 761 |
Fix |
An error occurred while Internet connection sharing was being enabled for the
connection. |
| 763 |
Fix |
Internet connection sharing cannot be enabled. There are two or more LAN
connections in addition to the connection to be shared. |
| 764 |
Fix |
No smart card reader is installed. |
| 765 |
Fix |
Internet connection sharing cannot be enabled. A LAN connection is already
configured with the IP address required for automatic IP addressing. |
| 766 |
Fix |
The system could not find any certificate. |
| 767 |
Fix |
Internet connection sharing cannot be enabled. The LAN connection selected
on the private network has more than one IP address configured. Reconfigure the LAN
connection with a single IP address before enabling Internet connection sharing. |
| 768 |
Fix |
The connection attempt
failed because of failure to encrypt data. |
| 769 |
Fix |
The specified destination is not reachable. |
| 770 |
Fix |
The remote machine rejected the connection attempt. |
| 771 |
Fix |
The connection attempt failed because the network is busy. |
| 772 |
Fix |
The remote computer's network hardware is incompatible with the type of call requested. |
| 773 |
Fix |
The connection attempt
failed because the destination number has changed. |
| 774 |
Fix |
The connection attempt failed because of a temporary failure. Try connecting again. |
| 775 |
Fix |
The call was blocked by the remote computer. |
| 776 |
Fix |
The call could not be connected because the destination has invoked the
Do Not Disturb feature. |
| 777 |
Fix |
The connection attempt failed because the modem on the remote computer is out
of order. |
| 778 |
Fix |
It was not possible to verify the identity of the server. |
| 779 |
Fix |
To dial out using this connection, you must use a smart card. |
| 780 |
Fix |
An attempted function is not valid for this connection. |
| 781 |
Fix |
The encryption attempt failed because no valid certificate was found. |
| 995 |
N/A |
Operation aborted. |
| 1382 |
N/A |
Maximum length exceeded. |
| 1793 |
N/A |
Account expired. |
| 2250 |
N/A |
Network connection does not exist. |
