CPU & RAM
- One or Two Quad-core 1.6, 1.8, 2.0, 2.33, 2.66GHz Xeon CPU 8MB Cache Supporting 1066 or 1333MHz FSB
- 2GB to 32GB Quad Channel Fully Buffered RAM
System Board
- System Bus Address and Data Bandwidth of 8.5 GB/s
- Support for Fault Resilient Boot
- 8 DIMM Slots Supporting FBD Memory Configurations (up to 32G of RAM) With the Following Features:
- Intel x4 and x8 Single Device Data Correction
- Integrated Memory Scrub Engine
- Retry on Uncorrectable Error
- Integrated Memory Initialization Engine
- DIMM Sparing Function
- Memory Mirroring
- Tower or 5u has 6 Expansion Slots Configured as:
- 2 x PCI Express x8
- 2 x PCI Express x4 (x8 Connectors
- 1 x PCI-X 100/133MHz
- 1 x PCI-X 100MHz
- 2u Rackmount has 4 Expansion Slots Configured as:
- 2 Low Profile PCI Express x8
- 1 Full Height PCI Express x4
- 1 Intel Adaptive Slot
- ATI ES1000 Video with 16MB Video RAM
I/O ports and Hard Disk controller(s)
- Six Independent SATA controllers Each Capable of up to 3.0Gb/s transfer rate (10 optional in Tower/5u)
- 1 independent PATA Channel with 40 Pin Connector
- Embedded Server RAID Technology Supports RAID 0, 1, 10, or Optional Cached RAID 5 with battery backup.
- 3 USB 2.0 ports (2 rear panel, 1 front panel) 2u Rackmount
- 5 USB 2.0 ports (4 rear panel, 2 front panel) Tower or 5u
- One 9-pin serial port
- 2 PS/2 ports for keyboard and mouse
- PCI power management support
Hardware Monitoring Capabilities
- Real-time Monitoring and Alerting of Hard Drive, Memory, Fans, Power Supply, and Temperature. ACPI Compliant
- Alert on LAN Support for Remote Hardware Inventory, Pre-boot Environment, and O/S Monitoring
- Hardware Monitoring ASIC for Local and Remote Server hardware Health & Security Monitoring
- Optional Remote Management Subsystem with Independent Network Interface
- Light Guided Diagnostics
Floppy, Hard Drives, and Optic Drives
- Optional CD or DVD/CDR
- 76GB, 152GB, 233GB, 372GB, or 466GB SATA II 300 Hard Drives with 8MB (76G and 152GB) or 16MB (233, 372 and 466GB) cache
- Supports Up to 10 Drives Tower and 6 Drives Rack mount
Network Interface
- (2) RJ-45 10/100/1000 Network Interface Connectors
- (2) 10/100/1000 82563 PHY’s offer Intel I/O Acceleration
Case and Power Supply
- Tower or 5u Configuration:
- 13 Drive Bays (3) 5.25” Fixed, (10) 3.5” Hot Swap SATA 3Gb/s Drive bays
- 830 Watt Hot-swap Power Factor Corrected, Redundant Power Supply (2nd supply optional).
- Monitored Redundant Case Cooling Fans.
- 2u Rack mount Configuration:
- 7 Drive Bays (1) 5.25 HH Fixed, (6) 3.5” Hot Swap 3Gb/s Drive Bays
- 750Watt Hot-swap Power Corrected, redundant Power Supply (2nd supply optional).
- Monitored Redundant Case Cooling Fans.
System Dimensions
- 17.5" H x 8.6" W x 26.9" D Tower or 5u (plus brackets)
- 3.44” H x 16.93” W x 27.95” D Rack Mount
- Weight 70.5 lbs (minimum configuration)
- +10°C to +35°C Operating Temperature
- 17.5” H x 8.6” W x 26.9” D Pedestal
- +40°C to +70°C Non-operating Temperature
- 95% @ +30°C Non-condensing Relative Humidity
|
|
|
