CPU & RAM
- Intel Celeron, Pentium D, Core2 Duo CPU and Core 2 Quad
- 512K cache and 533 MHz bus on Celeron D CPU’s
- 1MB cache 800MHz bus on Pentium D CPU’s
- 2MB or 4MB shared cache and 1066MHz bus on Core 2 Duo CPU’s
- 8MB cache and 1066MHz bus on Core 2 Quad CPU
- 512M to 8GB DDR2 667 ECC RAM
System Board
- Intel 3000 Server chipset
- Intel
- Intel 28F320C3 32megabit memory component for 2096Kx16 of BIOS and non-volatile storage space
- 1U Rackmount Configuration:
- Two PCI 32bit/33MHz 3.3V PCI slots
- One x1 PCI Express resource implemented as One x4 PCI Express Connector
- One x4 PCI Express resource implemented as One dedicated PCI-X 64/100MHz slot and the PCI-X portion of the Intel Adaptive Slot
- One x8 PCI Express resource implemented as the x8 PCI Express portion of the Intel Adaptive Slot
- Tower Configuration:
- One PCI Express* x 1
- One PCI Express* x 4
- One PCI Express* x 8
- Two PCI 32-bit/33 MHz
ECC RAM support - Hardware Memory Scrubbing
- Integrated Serial, USB 2.0, and Mouse Ports
- Integrated Management Controller for Local and Remote Server Hardware Health & Security Monitoring
- Emergency Management Port for Remote Management of Downed System via External Modem
- ATI ES1000 Graphics Engine with 16M of Dedicated RAM
- Serial ATA host controller
I/O ports and Floppy/Hard Disk controller
- Intel ICHR7 I/O Controller Hub Featuring:
- (1) 100MB/s PATA Channels Interfaced by 40 pin connector
- 4 Independent SATA channels Supporting up to 3Gb/s
- Intel Software RAID via the ICH7R Supporting RAID1
- 4 USB Ports; Two Routed to the Back Panel, Two Routed to the Front (if applicable)
- One Serial Port via High Speed 16550 Compatible UARTs with 16-byte Send/Receive FIFO’s
- Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems
- PS/2 style Mouse and Keyboard Interfaces
- Interface for 1 1.44 MB Diskette Drive Including Analog Data Separator and 16-byte FIFO
- Intelligent Power Management, Including a Programmable Wake-up Event Interface
- I2C Interface to Heceta Sensors (One PWM based fan controls), Software or Local Temperature Feedback Control, and Chassis Intrusion Detection
Floppy, Hard Drive and Tape Drive
- 2 or 3 (2u), or 2-6 (Tower/5u) 76, 152, 233, 372, or 466GB SATA 3GB/s 8MB (76 or 152GB) or 16MB (233GB+)buffer
- Hot Swap Hard Drives
- Optional Slimline 1.44MB Floppy Drive (rack)
- Optional 1.44MB Floppy Drive (tower)
- Slimline CD or Optional DVD/CDR (rack)
- Full height DVD or Optional DVD/CDR (tower)
Network Interface
- 2 10/100/1000 Network Interface Ports
- One Intel 82573E/V via a x1 PCI Express Interface
- One Intel 82541PI via a 32bit/33MHz PCI segment
- IEEE 802.3u Auto negotiation support
- 3 Kbyte Transmit and 3 Kbyte receive FIFO’s
- Fast Back to Back Transmission Support with Minimum Interframe Spacing
- Advanced Power Management Capabilities
- Remote Power up Support
- IEEE 802.3 10BaseT/100BaseTX/1000BaseT Compliant Physical Layer Interface
Case and Power Supply
- 9 Drive Bays (2) 5.25", (7) 3.5" Tower Configuration
- 4 Drive Bays (1) 5.25" Slim, (3) 3.5" 1U Configuration
- Power Factor Corrected (PFC) Power Supply Providing 250 watts (Rack) or 500 Watts Plus Optional Redundant 500 Watts (Tower) of power at 100-127V @ 50/60Hz; 5.67A or 200-240V @ 50/60Hz; 2.89A
- Monitored Case Cooling Fans
Environmental Specifications
- 1.685” H x 16.93” W x 23.89” D Weight 35 lbs (rack configuration)
- 17" H x 7.25" W x 17.5" D Weight 37 lbs (tower configuration)
- 10°C to 35°C Operating Temperature
- -40°C to +70°C Non-Operating Temperature
- 95% Non-Operating Non-Condensing Relative Humidity at 35°C
- 69.6 dB Sound Pressure @ 23°C
- +/- 15kV ESD per Intel Environmental test specification
- 1180 BTU/hr
|
|
|
