CPU & RAM
- Intel Celeron, Pentium D, Core2 Duo CPU and Core 2 Quad
- 512K cache and 533 MHz bus on Celeron D CPU’s
- 1MB cache 800MHz bus on Pentium D CPU’s
- 2MB or 4MB shared cache and 1066MHz bus on Core 2 Duo CPU’s
- 8MB cache and 1066MHz bus on Core 2 Quad CPU
- 512 to 4GB Dual Channel DDR2 667MHz RAM
- Easy upgrade allows mixed memory types
System Board
- Intel 965Q chipset with support for low voltage processors
- Two 32bit, 33MHz PCI Conventional bus connectors
- One PCI Express x1 add-in card connector
- One PCI Express x16 add-in card connector
- 4 DDR2 RAM banks supporting 667MHz memory modules
- Integrated Serial, Parallel, mouse and audio ports
- 533/800/1066Mhz front side bus
- Hardware monitoring ASIC for PC health monitoring
- Reduced boot time enables faster system availability
Video Subsystem
- Support for Windows Vista Premium
- Intel GMA 3000 Graphics Core
- Up to 12.8 GB/sec memory bandwidth
- 1.6 GPixels/sec and 1.6 GTexels/sec fill rate
- 256MB maximum video memory
- 2048x1536 at 75 Hz maximum resolution
- Dynamic Display Modes for flat-panel, wide-screen, and Digital TV support
- Microsoft DirectX 9 Hardware Acceleration Features:
- Pixel Shader 2
- Volumetric Textures
- Microsoft DirectX 9 Vertex Shader 3.0 and Transform and Lighting supported in software through highly optimized PSGP
- OpenGL 1.4 support with ARB extensions
- High Definition Hardware Motion Compensation to support HD hi-bitrate MPEG2 media
Integrated Audio
- High Definition Audio subsystem
- 6-channel (5.1) audio subsystem with three analog audio outputs using the Sigmatel STAC 9227 audio codec
- Advanced jack sense for the back panel audio jacks for retasking or auto-switching
- Stereo input and output for all back panel jacks
- Line out and Mic in functions for front panel audio jacks
I/O ports and Floppy/Hard Disk controller
- 1 parallel ATA IDE connector that supports two devices
- 6 3Gbits/sec serial ATA IDE connectors that support one device per connector
Configurable in RAID 0, 1, or 10 (dependant on chassis and number of drives)
- IEEE 1394a (fire wire) connector for up to 400Mbits/sec transfers
- Universal Serial Bus 2.0 (up to 40x faster than v1.1) ports
- 2 Front Panel USB 2.0 ports
- 4 Rear Panel USB 2.0 ports
- 1 Gigabit Ethernet Interface
Floppy & Hard Drive
- 1.44MB floppy drive (optional)
- 76GB SATA 3Gb/s Hard Drive-7200RPM, 8.5 ms seek, 8M buffer, NCQ
- 233GB SATA 3Gb/s Hard Drive 7200RPM, 8.5 ms seek 16M buffer, NCQ
DVD-ROM
- 16/52X (DVD/CD) MAX UDMA-33 ATAPI
- 22,100KB/s/7,8000KB/s (DVD/CD) maximum transfer rate
- 110/98ms (DVD/CD) access time
- 256KB buffer
Optional DVD-ROM Burner
- 12/40X (DVD/CD) Read MAX UDMA-33 ATAPI
- DVD-R: 18x* CLV
- DVD-RW: 6x* CLV
- DVD+R: 18x* CLV
- DVD+RW: 8x* CLV
- DVD+R DL: 4x* CLV
- DVD-R DL: 2x* CLV
- CD-R: 48x* CLV
- CD-RW: 24x* ZCLV
*High-speed media required
Optional DVD-ROM+CDR/CDRW Burner (Combo Drive)
- 16/52X (DVD/CD) Read MAX UDMA-33 ATAPI
- CD-R: 52x* FCAV
- CD-RW: 32x* PCAV
- 120/100ms (DVD/CD) access time
- 2MB buffer with buffer under run prevention technology
- Data CD creation via integrated Windows XP CD-burning functions
*High-speed media required
Additional Professional Features
- Storage of hardware and software assets in NV-RAM for remote inventory access
- Users cannot remove or prevent IT access to inventory management
- Alerting and event logging
- SSL3.1/TLS encryption
- IDE-Redirection or PXE boot; network drive or remote CD boot
- Serial over LAN
- OOB diagnostics
- Remote Control
- Remote BIOS update
- Programmable policies
- Operating System lock-up alert
- Boot failure alert
- Hardware failures alert
Case and Power Supply
- Micro Tower convertible desktop case
- 3 drive bays (1) 5.25", (2) 3.5"
- 300 Watt ATX 12v rev 2.0 UL recognized power supply
- 2 Monitored case cooling fans
- Temperature based fan control for precision cooling
System Certifications and Dimensions
- 14.5" H x 7.25" W x 17.25" D Weight 31lbs
|
|
|
